Section Manager Roads
(A Complete Solution to your Earth Works Calculation)
        This version named as Newgen Section Manager Roads now available in three modes specially customized for below listed projects with respective features.

NH (Multi-Lanes Roads)

Features include
  • Survey-data can be directly incorporated into the software through downloadable files of manual survey machines and Total Station machine &. Digital level machine of various made like Nikon, Sokkia, Kolida & Laika.
  • Manual methods survey data can be fed in to the system for the subsequent purposes.
  • RL from survey data can be prepared with subsequent arithmetic check.
  • Compatibility with third party software such as AutoCAD and Adobe’s acrobat reader/writer & Microsoft Excel.
  • Multiple layers survey data can be entered or generated for subsequent calculation in a project.
  • Execution Layers RL can be input or generated to the system.
  • Multiple layers survey data can be entered or generated for subsequent calculation in a project such as OGL, PCC, BT, IGL etc. Survey-data can be directly incorporated into the software through downloadable files of manual survey machines and Total Station machine &. Digital level machine of various Nikon, Sokkia, and Kolida & Laika. Also helpful in part billing process.
  • Crust layers can be designed and subsequent calculation can be prepared as per the profile. And a dedicated page for showing all crust layer in a CS diagram with calculations. Partial cutting and partial filling volume can be obtained.
  • LS can be designed with various parameters. Such as with constant thickness, constant gradient and constant level with respective parameters such as value ,percentage and level for a range of sections or for a whole projects in a single command. The design parameters can be altered as per the requirement with detail diagrams and subsequent roll back can also be possible for number of times with a single command button execution.
  • Crust layers RL can be generated or directly fed up to the system as per the requirements.
  • Execution layer RL and level can be input as per actual also multi layer RL can be generated or entered as per the requirements.
  • Cross- Sectional section can be designed with various parameters in force such as camber slope carriage width slope, shoulder’s slope, if it is an up-gradation road then with cutting depth and width. There is provision for profile design also. Number of times design updation again subsequent roll back with a single command execution.
  • Provision of super elevation & extra widen portion design and subsequent calculation.
  • Simple entry form for horizontal curve design data & single command for design & subsequent calculation of super elevation as per the curve data.
  • Different carriage width, slope, embankment for left side and right side of the road.
  • LS design is possible between initial and final level, initial & intermediate1 and between PCC level with crust quantity can be calculated separately.
  • Provision for marking the HFL (High Flood Line) in the LS diagram along with the required comments.
  • Volume calculation for different crust layers individually and in a combined format.
  • Volume calculation for the whole project or for a range of cross section without disturbing the LS of the road.
  • Longitudinal and cross- sectional diagram can be drawn on graph sheets. If required it can be drawn without the graph sheets also.
  • Volume calculation, Turfing Area can be calculated by execution of a single command button.
  • Diagram and volume calculations with all specified layer options.
  • In all specified layer calculation it demarcated the different filling layers and cutting layers with calculations.
  • Crust volume calculation can be achieved separately layer wise and in combine.
  • Provision for providing retaining wall and drain to the road and subsequent calculations.
  • Provision for interchanging of layers data, incase of mistaken entry & other purposes.
  • Provision of centre shifting and subsequent designing and calculations.
  • For quick and better & accurate calculation, there is a command to manage the quantity for a range of sections with the specified offset area. It minimizes the error.
  • Provision for under lying is there so that desired quantity can be calculated before going for final BT.
  • Profile Correction of existing BT road.
  • Separate provision of calculation of existing BT in a single command in up-gradation roads.
  • There is a provision for calculation of section with both excavation and filling.
  • Provision for inserting customized drain as per the requirements and subsequent quantity calculations.
  • Apart from regular embankment slope setting there is a dedicated command option to set the dynamic embankment slope.
  • Provision for insertion of offset to give the section a typical presentation without altering the quantity.
  • Provision for synchronizing the CS data in case of TS survey.
  • In an exclusive report format, separated area calculation sheet can be generated.
  • Reports on Toe- points.
  • A separate report on Turfing Area in a tabular format and that to with respect to different layer.
  • A drawing of alignment is also possible if survey is made either through TS machine or through compass survey data.
  • A single template for a cross sectional diagram page contain the quantities of Earth Filling, Earth cutting, LBM,BM, BT, Different layers, Median filling and Kerbs etc.
  • Profile designing is possible and subsequent calculation can be performed.
  • The CS Diagram shows profile area demarcated in a different color along with the other layers and a customized legends.
  • Generation of level Book based on the RL value for reading, offset and calculation.
  • Decimal digit round up facilities is there.
  • Provision of final check up of drawings to give zero error outputs.
  • Least count adjusts facility according to the requirements.
  • Facility to change the datum, scale of CS diagram.
  • Facility to marked culvert, bridge, CC road etc on LS Diagram.
  • Option available to print the output drawings in A4/legal/A3 size paper.
  • Updated printable level book and survey book.
  • A problem static report for troubleshooting if any.
  • Excellent provision of data back-up and recovery enables users to protect data from data loss.
  • Consume minimum time along with excellent data editor for data input.
  • Apart from above these, it has all the facilities and benefits of working on a GUI based interactive interface.
SAMPLE OUTPUTS
Click for Details
Click for Details
Click for Details
Click for Details
Click for Details Click for Details
Click for Details
Click for Details